815-427-8350


815-791-0723

Current Sale Bill

 

THIS IS A LIST OF THE EQUIPMENT FOR OUR MARCH 27TH AUCTION AS OF MARCH 13TH. WE WILL UPDATE THIS LIST AGAIN AT THE END OF THE WEEK WITH NEW CONSIGNMENTS ADDED. FOR MORE INFORMATION OR PICTURES OF THE EQUIPMENT PLEASE CALL (815)427-8350. THANK YOU!

 

 LARGE FARM MACHINERY AUCTION

TUESDAY, MARCH 27TH, 2018 @ 8:00 AM (SHARP!!) CST

MFWD TRACTORS: 1997 JD 8400, 5600 hrs, duals, wts, fenders, 4 hyds; JD 8100, 4500 hrs, 90% rubber, sharp; 2013 NH T8.275, 3900 hrs, auto steer, one own, sharp; FNH 8770, Super steer, 18.4-42 axle mount duals, frnt wts, 7300 hrs, 3 hyd; Duetz DX160, CAH, 20.8-38 duals, 4900 hrs; JD 5300, w/ ldr, 4900 hrs, new clutch; CIH 3594, CAH, 18.4-42 duals, cold air, sharp; Case 3594, Case 3594, CAH, 18.4-42 axle mount duals, 6200 hrs, sharp; JD 4755, 9800 hrs, 2 yrs on eng OH, 18.4-42, 70%, frnt fenders, frnt wts, powershift, sharp;

4x4 TRACTORS: JD 8760, 18.4-42 duals, 80%; JD 8450, CAH, 3pt, pto, well maint; JD 8440, CAH, 20.8-38 duals, 3pt, pto; JD 8630, 20.8-38 10 bolt duals, 3 hyds, 3pt, pto; JD 8430, 20.8-34, 70%, 3pt, pto; JD 8430, 3pt, pto, 3 hyds, 6500 hrs; CIH STX325, 9200 hrs, 3pt, pto, light bar, well maint; IH 6588, 18.4-38, 90%, clean; IH 3588, 2+2, 18.4-38, 4600 hrs, nice; JD 8640, CAH, 3pt, pto, 20.8-38, 4900 hrs, 2100 hrs on 50 series eng, sharp;

TRACTORS: JD 4840, 6900 hrs, frnt wts, 20.8-38 axle duals, dual hyd; JD 4840, 20.8-38 duals, 7000 hrs, frnt wts, runs good; JD 4840, 8100 hrs, frnt wts, 18.4-42 tires, 3 hyds; JD 4440, 7800 hrs, power steer, duals, quick coupler, 540/1000 pto, 2 hyd; JD 4640, 6800 hrs, quad range, CAH; JD 4630, CAH, 20.8-38 axle duals, synco range, 6100 hrs; JD 4630, CAH, ps trans, 7800 hrs, frnt wts, 20.8-38; JD 4430, CAH (air does not work), 9800 hrs; 1972 JD 4020, dsl, side console, one owner; JD 4010, gas, NFE, eng overhaul; JD 2940, no cab, dsl, 7200 hrs, dual hyd; IH 5488, CAH, 6300 hrs, rem on motor 2011, 20.8-38 tires/duals; IH 5288, CAH, 20.8-38, square frnt axle; IH 1586, 18.4-38 tires, 1000 pto, dual hyd, 3300 hrs; 1981 IH 1486, CAH, 6600 hrs, 18.4-38, 80%, frnt wts, sharp; 1980 IH 1486, CAH, eng, rebuild, new air, repaint, sharp; IH 766, dsl, no cab; 1978 Case 1570, 2 own, 5300 hrs, frnt wts, 18.4-38 tires; CIH 1896, no cab, ps trans; White 2-155, CAH, 20.8-38 tires, red stripe, 1000 pto, 3 hyds; MF 398, dsl, no cab; Ford 6600, dsl, one own, w/ ldr; Agco 9150, CAH, 3300 hrs, clamp on duals, frnt wghts; JD 8300, 2400 hrs, frnt wheel assist, new motor; JD 4010, dsl, WFE; CIH JX75, CAH, MFWD, rear wts, joystick controls, lefthand reverser, w/ LX232 Ldr; JD 4955, 7700 hrs, 18.4R-42 tires; JD 4640, CAH, 20.8-38 axle duals, 80%, frnt wts, quick hitch, quad range, sharp; JD 4630, CAH, 18.4-38, 80%, frnt wts, quick hitch, sharp; IH 1086, CAH, 4800 hrs, 540-1000 pto, 18.4-38, 70%;

PETER ROMEIN & SONS FARM RETIREMENT (St. Anne, IL)

GRAIN, VEGETABLE & IRRIGATION EQUIPMENT

Brad (815)573-1673 or Dave (815)592-9106

JD 4630, CAH, 18.4-38 10 bolt duals, frnt wts, quad range; JD 4640, CAH, quad range, D range doesn’t work, all other gears good, runs great, 18.4-42 tires; JD 4020 Dsl, dual hyd, 14.9-46 tires, frnt wts, one owner; JD 4430, CAH, PS, frnt wts; JD 4230, rops, quad range, new clutch; JD 4230, syncro range, no cab, 4000 hrs, 100 hrs on trans rebuilt; JD 530, NFE, PS, one own, rock shaft, pops out of 6th gear, w/ JD 4R Cult (sells separate); Hyster 4000# LP Forklift; JD 260 Ldr, joy stick, controls, w/ pallet forks & bucket; JD 7200, 12R-30”, flex drive, dd open, liquid, insect, flat fold, markers, hyd fold; JD 7000, 4R-36”; JD 8300, 23x7, press wheels; Fast 1000 gal Sprayer, hyd drive, 3 way nozzles, rinse tank, 14.6-38 tires, Rawson 650; 500 gal Pull Sprayer; JD 12’ 3pt CP; JD 630, 22’; Glencoe 9x SS, 3 bar spike drag; JD 960 25’ FC, coil-tine harrow; JD 400, 20’; Glencoe 12R-30” Cult, danish-tine; JD 825 8R, danish-tine; JD 27 15’; JD 1100 22’, coil-tine harrow; JD RG6 6R; JD Offset Disk; JD C-11 FC, w/ gauge wheels; Woods 6’ Ditch Mower, 3pt, pto drive, hyd; Woods 6’ Mower, 3pt; 4’ 3pt Rototiller; 2006 Volvo Semi, VED12eng, 465 hp, 13spd, sleeper, 60” midroof, like new 22.5 tires alum rims, 650K miles, air ride susp, red; Chevy C65 Grain Truck, 5-2 spd, 14’ bed; 1973 IH 1700 Truck, 304 gas, air brakes, w/ 1000 gal water tank; 14 Pass Mini Bus; 26 Pass Blue Bird Mini Bus, auto, 350 eng; 1996 Thermo King 53’ Trailer, cold, alum wheels, air ride; 1986 Thermo King 48’ Trailer, runs but not cold; Woods RB850 8’ Hyd Blade, angle & tilt, 3pt; 8” x 60’ Feterl PTO Grain Auger; 400 bu Gravity Wagon; Vegetable Equipment: Tew 48” Veg Wash Line, 8’ roller intake, 3ph, hyd dump, grading table, 4 sizer, 40 wood bins; 20’-30’ x 18” Telescoping Belt Conveyor, elec 3 phase; (6) 16’ Cabbage Wagons, walking floor, 60” gears, 50 mph; (5) 8’ x 16’ Veg Wagons, 18” removable sides; (3) 8’ x 16’ Flat Wagons, 60” gears; AW 8R Cabbage Seeder; Mechanical 8R Carousal Transplanter; 3R Water Wheel Planter, 3pt; 3R Plastic Frnt Mount Cult; 1R 3pt Cult, danish-tine; 1R Plastic Lifter, 3pt; Toledo 250# Scale; Elec Pallet Scale w/ display; Irrigation Equipment (pipe is sold sep per ft in 80 rods per lot): (2) Long 1560 Hard Hose Traveler, ¼ mile, 3 ¾ “ hose, motor drive, no splices, good hose; Irrifrance Hose Pull 3”, 80 rod, bellow drive; 4500’ 6” ring lock; 3000’ 6” Felco; 750’ 6” Felco w/ 4x4 valves; 2000’ 6” Wade Rain 40’ long; 1300’ 6” Pierce; 500’ 6” Champion; (3) 6” Suction Pipe; (3) 5” Suction Pipe; 4000’ 4” Felco; 2500’ 4” Champion, ½ w/ sprinklers; 4000’ 3” Felco; 4000’ 3” Felco w/ sprinklers; 1200’ 4” Wade Rain, ½ w/ sprinklers; 1200’ 3” Wade Rain, ½ w/ sprinklers; Drip Irrigation (5) 6” Dripview Flow Filter; 1800’ 4” lay flat, 4” couplers, clamps, end caps; (4) Chrysler Irrigation Engines w/ pumps; 110 gal Fuel Tank w/ elec pump; (10) JD 40 Series Frnt Wts, w/ brackets; (20) JD 40 Front Weights; (12) JD 4020 Front Wts;

DEAN BETTENHAUSEN FARM RETIREMENT (425 acre farm in Beecher, IL)

Dean (708)243-8877

Case 2594, CAH, 4900 hrs, 2 own, 20.8-38 duals, frnt wts, cold air; JD 8440, CAH, duals, 3pt, pto, 6300 hrs, 2 own; JD 4630, CAH, 4500 hrs, 2 own, 18-4 tires/duals, frnt wts, original, very sharp; 1996 JD 9500 Combine, straddle duals, 80% rubber, thru JD shop-repair bills; JD 925, 3” cut, good poly; JD 843, lo-tin, oil bath, JD poly, hyd deck plates, sharp; Killbros 490 Cart, corner auger, new roll tarp, not installed; JD 7200, 8R-30”, wing fold, liquid, sharp; JD 630 22’ Disk, 22” blades; JD 960 22’ FC, new sweeps, drag; Glencoe 18’ SF, flat fold, sharp; CIH 2500 5x Inline Ripper, auto reset, light coulters, sharp; Caddy for Inline Ripper sold sep;

COLLECTORS: AC WD45, w/ power steering, sharp; IH H Tractor, WFE; Oliver Cletrac Tractor, refurbished, good shape;

INDUSTRIAL EQUIPMENT: 2013 C-238 Skid Loader, CAH, 2000 hrs, 90%, tracks, sharp; 2011 NH L225 Skid Loader, CAH, 1100 hrs; Case 1845 Skidsteer, w/ 10’ bhoe, rake, breaker, (2) buckets; 1977 Lahman Skidsteer, runs & operates good; Daewoo G20SLP Forklift, 3900 hrs, sharp; Case W20B Articulated Loader; Self-loading Dirt Scraper, dolly wheel, pto drive, pull-type; Lowe 750 Hyd Auger, w/ 12” bit; Stout 72-8 Brush Grapple; Stout XHD 84-6 Brush Grapple; Stout HD72-3 Rock Bucket/Brush Grapple Combo, open end; Stout 48” Walk-Through Pallet Forks; Clark 4000lb Forklift, cab, propane; 3pt Hitch Forklift;

MECHANIC SPECIALS: Case 2290, bad clutch; CIH Farmall 95, no cab, MFWD, 3700 hrs, runs good, doesn’t go into reverse; CIH 695, trouble shifting; IH A; JD 4630, power shift trans, slips, good motor; JD 500 TLB, runs; JD 50, NFE, good rubber, 3pt; IH 1066, no cab, weak clutch; JD B;

PLANTERS: 2004 Kinze 3650, 16/31R, NT, Keaton seed firmers, sharp; Kinze 2600, 12/23R, no-till, sharp; Kinze 2000, 6R-30”, dry; Kinze 2000, 6R-30”, double frame, liquid fert, trash whips; Kinze 2000, 6R-30”, liquid, NT combos, piston pump; Kinze 6R-30”, double frame; Kinze DP, 6/11R, double frame, new seed open, NT; Kinze 15R-15”, 3pt, markers, NT; JD 1780, 6/11R, finger pu, NT, sharp; JD 1780, 6R-30”, dry, 3bu boxes, NT combos, single disk fert open, cross auger, new seed openers; JD 1750, 6R-30”, dry, single disk open, combo no-tills, cross auger, vac, like new; JD 7240, 6/11R, 3bu boxes, NT, heavy duty down pressure springs; JD 7240, 6R-30”, dry, vac; JD 7340, 15” bean planter; JD 7200, 16R-30”, vac, liquid, single disk open; JD 7200, 12R-30”, liquid, ground drive piston pump, single disk fert open, new seed blades, flex frame; (2) JD 7200, 12R-30”, liquid, vac, single disk open, poly boxes; JD 7200, 8R-30”, vac, liquid, sharp; JD 7200, 8R, liquid, double disk fert open, floating trash whippers, vac, sharp; JD 7200, 8RW, wing fold, pto pump, liquid;JD 7200, 8R, front fold, liquid; JD 7200, 6R-30”, vac, dry fert, cons frame, new seed openers, NT; JD 7200, 6R-30”, dry, NT, vac; JD 7200, 6R-30”, cons, liquid, NT, single disk open, poly boxes, finger pu; JD 7200, 6R-30”, cons, liquid, vac, sharp; JD 7200, 6R-30”, liquid, new seed open; JD 7200, 6R-30”, w/ 5R bean splitter; JD 7200, 4R-30”, vac, dry; JD 7100, 4R, 3pt; JD 7000, 12R-30”, liquid, NT, flat fold markers; JD 7000, 8R-30”, liquid; JD 7000, 6R-30”; JD 7000, 6R-30”, NT; JD 7000, 4R, dry, Computrak 100, sharp; (2) JD 7000, 4R, dry, NT; JD 1530, 20’, 15” Bean Planter, markers, NT, pneumatic down pressure, sharp; Agco White 8180, 16R, liquid, sharp; White 6100, 8R-30”, new seed disks; White 6100, 8RW, w/ 7R splitter; White 6100, 8R-36”, dry; Black Machine 12R-30”, w/ JD 7200 vac meters, NT; NI 8R-30”, dry, NT, finger pu; NI 6R-11”, Kinze row units, dry, NT, auger fill, sharp; Buffalo 8000, 6R-30”, dry; JD 1790, 16/31R, NT, heavy duty down pressure springs, smart boxes, refuge tank; JD 7000, 6R-30”, dry fert, NT, 300 acres on rebuild; CIH 950, 8R-30”, w/ 7R bean splitter; JD 7240, 6/11R, single disk open, liquid, NT, vac; JD 7200, 12R-30”, dry fert, flex frame, vac, NT, single disk fert, Comp 200; Kinze 1R, 3pt hitch; JD 1780, 12/23R, heavy duty down pressure springs, new meter drive shafts & bearings, Green Star monitor & Seed Star ready; White 6100, 8R-36”, SM3000 mon, w/ 7R splitter; Kinze 2000, 6/11R, frame mounted no-till, corn & bean meters;

PLANTER PARTS: (3) Yetter 15’-20’ Markers; (4) Groups of (8) JD 7200 NT Openers; (3) Rear Hitch off FC; Unverferth 15’ Quick-fill for drill; JD Cat III Quick Coupler; (12) JD Single Disk Fert Open; (6) Yetter NT Combos; (4) Plow Coulters; (5) Plow Coulters; Multiple 1.6 Seed Box Ext for JD & Kinze; (12) JD 7000 NT Units; JD Frnt Fuel Tank; (5) DMI Parabolics; (3) Sets of Yetter Shark tooth Trash Whips, exc cond; (16) JD Double Disk Fert Open; (8) JD 7000 NT Openers; Pr of Markers for JD 12R-30”; Pr Marker Arms for JD 7000; Gauge Wheels & Closing Wheels for JD 7000; (16) Kinze Trash Whippers; (12) Kinze Single Disk Fert Openers, used 1 season; (31) Kinze Planter Extentions; (15) Kinze Planter Boxes; (15) JD Planter Boxes; (15) Closing Wheel Attachments for JD 7000; (24) Smart Boxes w/ wiring; (24) Seed Box Extensions; (24) Trash Whippers; (16) Kinze Single Disk Fertilizer Openers; (16) Double Disk Fertilizer Openers;

GRAIN DRILLS: 1994 GP SS2000, markers, new seed blades & NT blades; GP 30’, 6” sp, needs blades; GP 24’, NT, 10” sp, markers; GP 24’, NT, 7.5” sp, markers; 1995 GP 2000, 20’, NT, markers;

GP 15’, 7.5” sp, markers, 3pt hitch; GP 15’, 7.5” sp, grass, needs blades; GP 15’, no-till, grass; GP 1500, 15’, no-till, 6” sp; GP 1205, 3400 acres, no-till, new seed open, 7.5” sp; GP 1500, 15’, NT, 7.5” sp, sharp; GP SS10, 7.5” sp, grass, sharp; GP 10’, no-till, grass; JD 750, 20’, 2pt hitch, markers, rebuilt, grass seed, sharp; JD 8300, 15’, 23x7”, grass seed, press wheels; JD 23x7”, grass, sharp; CIH 5400, 20’, Yetter NT caddy, markers; CIH 5400, 15’, 8” sp, marker, Yetter NT caddy, rebuilt 1 yr ago; CIH 5300, 24x6”, grass, sharp; Tye 15’, no-till, new seed open, 7” sp; Tye 2015, 15’, no-till; JD 750, 10’, no-till, dolly wheel, markers; Marliss 12’, NT, new seed blades, sharp; JD 1560, NT, 2pt, Yetter markers, 7.5” sp, lights, on the go pop adj; JD 750, 15’, NT, new blades, dolly wheel, grass; 1996 JD 750, 15’, NT, grass; JD 750, 15’, 7.5” sp, dolly wheel; JD 8300, 21x7, grass, press wheels; JD 750, 15’, 7.5” sp, dolly wheel; CIH 5100, 21x7, grass, press wheels; 1995 GP 1500, 15’, NT, grass;

SPRAYERS: 1997 Rogator 854, 60’-80’ booms, monitor, sharp; JD 6500, NFE, front fold booms, JD monitor, sharp; JD 500 gal, 30’ booms; Navigator 575, hi wheel, foamer, pto pump, 45’ booms, fenders, sharp; Hardi 600 Gal, high wheel, 45’ booms, rinse tank, inductor, foamer, pto pump, sharp; Hardi Top Air 1000 gal, foamer, 60’ booms; Top Air 800 Gal, tandem axle, hyd pump, foamers, 45’ hyd booms, sharp; Top Air 800 gal, 40’ booms, controls; Hardi 250 gal, 3pt;

FERTILIZER EQUIP: Laco 18” x 50’ Fertilizer Conveyor, stainless steel, like new; 18” x 30’ Belt Fertilizer Conveyor, on carrier; 12 Ton Fertilizer Tender, extra auger; Wilmar 8 ton Fert Spreader, 16” chain, double fan, tandem axle; 30’ Belt Conveyor, 18” wide; Wilmar 600 Fert Spreader, tandem axle, double fan, tarp; Tyler 5T Fert Cart, tandem axle, 10” chain; Blue Jet AT3000 12R-30” 28% Applicator, 1500 gal tank, ground drive; CIH 5300 ANH3 Appl, 15x, 3pt, cooler, control valvs, double disk sealers; DMI 30’ ANH3 Appl, 11x, 30” sp, 3pt, hyd fold, no-till, disk covers;

DISKS: JD 637, 21’, 5 bar drag, only worked 200 acres; JD 630, 25’, hyd level, sharp; JD 630, 25’, 9” spacing, new 22” blades; JD 630, 21’, 22” frnt blades; JD 630, 18’, coil-tine harrow, hyd leveling hitch; JD 630, 25’, 7.5” sp, 22” blades; JD 630, 22’, 9” sp; JD 331, 28’, 9” sp; JD 330, 28’; JD 230, 24’, sharp; JD 235, 21’, single fold; (2) JD 230, 21’; Rome 35’, narrow main frame, no welds, sharp; Krause 7300, 30’, sharp; CIH 3900, 25’, new blades; CIH 496, 22’, 7.5” sp; CIH 496, 25’, coil-tine harrow; IH 490, 21’; IH 470, 18.5’; Kewanee 1010, 18’; Kewanee 1020, 22’; CIH 3800, 14’, w/ new blades; JD 235, 18’, single fold; CIH 496, 22’, 22” blades, narrow main frame;

ROCKFLEX DISKS: JD 635, 33’, 24” blades, hyd level; CIH 3900, 30’; Landoll 6230, 26’, like new; MF 820, 21’;

OFFSET DISKS: CHI 770, 12’; IH 770, 24’, hyd fold, 26” blades,

SOIL FINISHERS: JD 726, 18’, 5 bar coil-tine harrow, sharp; JD 722, 24’, new sweeps, coil tine harrow; Landoll 25’, beater basket, 3 bar spike drag; Landoll 15’, hyd flat fold, narrow trans, beater basket, 5 bar spike drag, some welds on main frame; Landoll 850, 14’, w/ spike drag, sharp; Glencoe Terra-tamer, 24’, beater basket, spike drag, needs front blades; Glencoe 555, 24’, 5 bar spike drag, rear hitch; Glencoe 21’ Terra-tamer, spike drag; Krause 3119, 20’, coil-tine harrow; JD 726, 30’, new sweeps & shank protectors, 5 bar harrow; CIH 4200, 27½’, w/ 7 bar drag, rockflex, walking tandems;

FIELD CULTIVATORS: JD 985, 50’, triple fold, coil-tine harrow; JD 980, 30’, danish-tine, 5 bar spike drag; JD 980, 28’, 3 bar spike drag, new sweeps; JD 980, 28’, 5 bar spike drag; JD 960, 36’, coil-tine harrow; (2) JD 960, 30’, coil-tine harrow; JD 960, 24’, danish-tine, never used but weathered; CIH 4800, 28’, rear harrow; CIH 4800, 22’, coil-tine harrow; IH 4500, 18’; IH 45, 18’, hyd fold; WR 26’, Rem 3 bar harrow; WR 26’, 3 bar spike drag; WR 25’, 5 bar spike drag, sharp; WR 20’, coil-tine harrow, rear hitch; Glencoe 28’; Glencoe 14’; (2) JD 1010, 22’, new sweeps, coil-tine harrow, narrow main frame; DMI 45’, double fold, 5 bar spike drag; DMI 24’, coil-tine harrow; JD 980, 45’, triple fold, heavy shanks, 5 bar spike drag;

VERTICAL TILLAGE TOOLS: McFarland 30’ Reel-till;

CULTIMULCHERS: Brillion 25’, flat fold, ductile rolls, frnt & back scrapers, danish-tine teeth;

Brillion 30’, flat fold, ductile rolls; Dunham Lehr 22’, scrapers;

PACKERS: Brillion 12’, hi-lift; Brillion 21’, scrapers; Brillion 27’, vert fold; Brillion 32’, x fold, cast rolls; Brillion 36’, x-fold, scrapers, ductile rolls; Brillion XXL, 43’ Optimizer; Farmhand 42, 27’, crow foot; Dunham Lehr 42, 34’;

CRUMBLERS: UV 1225, 34’, green, double rolling basket, never used; UV Rolling Harrow II, 32’; UV 22’, double rolling basket; J & M TF215, 36’, buster bar, double rolling baskets; CIH 110, 25’, sharp; CIH 22’; DMI 40’, triple fold; Killbros 36’; Sunflower 28’;

CULTIVATORS: JD 875, 6R-30”, rolling shields, sharp; JD 825, 6R-30”, danish-tine, jolly cranks; JD 85, 12R-30”, danish tine; JD 85, 8RW; JD RM, 6R-30”, rolling shields; CIH 1840, 12R-30”, no-till, shields, lift assist; CIH 183, 8R-30”, rolling shields, Neece levelers; IH 183, 6R-30”, danish-tine, rolling shields; IH 2R, 3pt, rolling shields; Hiniker 5000, 4R, no-till; WR 12R-30”, rolling shields, like new;

ROTARY HOES: JD 400, 15’, excellent cond; JD 400, 20’;

DISK RIPPERS: 2011 Landoll 2211, 11x, gates, coil-tine harrow, like new; CIH MRX690, 7x; DMI 730, 7x, lead shanks; DMI 730, 7x, 3 bad shanks; JD 512, 5x, sharp; (3) JD 510, 5x; JD 510, 7x; Glencoe DR8500, 5x;

RIPPERS: Agco 5x, 3pt, auto reset, coulters; Wil-Rich 5x, 3pt, auto reset, coulters;

SOIL SAVERS: JD 714, 11x, walking tandems; JD 714, 9x; Glencoe 9x; White 435, 10x, springs; DMI Coulter Champ II HD, 13x, leveler; DMI Ecolo Tiger, 11x;

PLOWS: JD 3955, 5x, switch plow; JD 2450, 8x, onland; IH 720, 6x, late model; IH 710, 6x, auto reset; IH 710, 6x, onland, auto reset, sharp; IH 700, 8x, auto reset, pull-type; IH 700, 6x, pull type, auto reset; JD 720, 5x-20”, auto reset, exc cond;

CHISEL PLOWS: IH 15’, 3pt; Case 16’, 3pt, springs; MF 15’, 3pt; MF 20’, 3pt; MF 12’, 3pt; Glencoe 9x; JD 1600, 12’, 3pt, springs; CIH 5600, 36’, 3 bar coil-tine harrow, spring reset;

STALK CHOPPERS: JD 120, 20’, end trans; JD 27, 15’; CIH #60, 15’; Balzer 1800, 20’; (2) MC 15’; JD 520, 20’, end trans, sharp; IH 6’, pull type;

TMR MIXERS: Knight 5032 Vertimax Vertical Mixer, low profile, lefthand discharge, scales; Gehl 7210, scales, LH discharge;

FEED GRINDER MIXERS: LMC 1600, 130 bu, intake auger, hyd drive, scales, new; AW 5165, scales, hyd unload & intake augers, sharp; CIH 1250, 1st turn on hammers, intake auger, scales, sharp; NH 358, intake auger, long unload, hyd drive, analog scales; NH 355, hyd drive, intake auger, long unload; JD 700, intake auger, scales, long unload auger, hyd drive; OMC 435, intake auger; NH 352;

MANURE SPREADERS: 2014 NH 185, slop gate; JD 550, top beater, sharp; NI 360, top beater, only used for 6 loads; Frontier MS1108;

HAYBINES: JD 1219, 9’ cut, hyd hitch; JD 1207, 7’ cut, gear box redone, like new tires, runs good; Hesston 1160, 12’; CIH 8330, 9’, new sickle; Hesston 1160, 12’; NH 1431, SN-652496;

DISCBINES: NH H7230, 9’, like new; NH H7220, 9’, sharp; JD 936, sharp; JD 945, hydra swing, 12’ cut;

HAY RAKES: Hyd Hay Rake; RCS 8 Wheel Hay Rake;

ROUND BALERS: NH BR780; NH 855, net wrap, sharp; NH 855, twine tie; NH 853; Vermeer 505 Super I, twine ties, tucker wheels; Gehl 1310, drum baler; MF 834, twine tie; Gehl 1450;

SQUARE BALERS: NH BB940, 3x3, 18000 bales; FNH 565, square, thrower; NH 315, square, thrower, sharp; CIH 8575 Silage Special, chute; Hesston 4600, in line;

MISC FORAGE: Grain-o-vator 400 Feed Wagon, hyd, new augers & bearing 1 yr ago, sharp; Grain-o-vator #20 Feed Wagon, tandem axle, hyd swing, unload auger, sharp; Grain-o-vator #10 Feed Wagon; 2015 Brillion Sure Stand SS112 Seeder, hyd lift, same as new; Brillion Sure Stand SS10 Seeder, hyd lift, sharp; Brillion 12’ Sure Stand Seeder, hyd lift, double box; Farmhand HG3040 Hay Grinder; New Rhino 8’ Hay Tedder, pto drive; CIH 600 Silage Blower; (2) 14’ Hay Wagons w/ backs; 8’x 24’ Hay Rack w/ back; 24’ Hay Elevator; JD 350 Sickle Mower, 9’; Brillion 10’Sure Stand Seeder, hyd lift;

RED PINE TREATED FENCE POSTS: (56) 6” x 8’, 28 per bundle; (660) 3½” x 7’, 66 per bundle;

FRONT LOADERS: JD 158; JD 148, off 20 series; Farmhand Ldr, off JD 40 series;

COMBINES: JD 9650, 4WD, 4000/3100 hrs, bin ext, single tires; 1997 JD 9500, 4400/3100 hrs, 30.5-32 tires; JD 7720, 4WD, 3900 hrs, 24.5-32 tires; JD 7720, 4300 hrs, heavy rear axle, through JD shop; 1986 JD 6620, Titan II, 4x4, hydro, 3100 hrs; JD 6620, one own, hydro, 2500 hrs; JD 6620, 3700 hrs; CIH 1640, 4800 hrs, 28L-26 tires; CIH 1660, 4200 hrs, rock trap, Cummins, just off farm; 1983 JD 7720, 2800 hrs, 24.5-32 tires, sharp; JD 9450, 2800/2100 hrs, 30.5-32, 60%, chaff spreader, sharp;

GRAIN HEADS: JD 920F, 3” cut, sharp; JD 920, 20’, good poly, sharp; JD 920, rough; (2) JD 915; JD 218, good poly; JD 216; CIH 1020, 30’; CIH 1020, 17.5’; (2) CIH 820, 17.5’; AC L or M, 15’; JD 920, 3” cut, good poly;

ROW CROP HEADS: JD 653A, 6R-30”; JD 453, 4R-30”;

CORN HEADS: JD 1293, 12R-30”; JD 693, 6R-30”, pto hook up; JD 643, 6R-30”, hi tin; JD 643, 6R-30”, oil bath; JD 444, 4RW; CIH 2208, 8R-30”; CIH 1063, 6R-30”; AC L or M, 6R-30”, black;

AUGER CARTS: Kinze 840, w/ Shur-Lok roll tarp; Kinze 400; Brent 472, corner auger, new augers 1 yr ago, roll tarp; Brent 420; J & M 500, 14” auger; J & M 525; UFT 400 bu; Orthman 500 bu, sharp; Killbros 1400, 30.532 tires; JD 500; Killbros 1400;

WAGONS: Brent 544; UV 530, green; (2) Killbros 375; (2) Parker 4000; Ficklin 4500;

GRAIN AUGERS: Wheatheart GHR80-41, pto drive, never used;

GRAIN CLEANERS: DMC High Capacity;

TRUCKS & TRAILERS: 53’ Storage Trailers; 1992 Peterbuilt, tandem axle, 20’ box, hyd end gate, black, Detroit 66 series motor; 2009 Ford F150 Pickup, 4WD, auto start, white; 2003 Country Blocks Trailer; 2013 Gatormade Inc. Trailer; Red Truck Bed, for 2ton truck; JD 28’ Planter Trailer, always shedded;

MISC EQUIPMENT: Eversman 240 MTS 3pt Rototiller, hyd lift assist, well maint; JD 20’ Coil-tine Harrow; 10’ Lely Roterra; Rhino 3pt Hyd Blade, tail wheel; JD 4WD Unit; Cardinal Seed Conveyor; Pull-type Rock Picker, pto drive; Sukup Slide Glide Row Crop Guidance System Complete; Degelman Rock Picker, pto drive; 3pt Rear Blade; Travis 2 Box Seed Tender; Howard 15’ Roto-Spike, 3pt; Woods 6’, 3pt; Yetter 1600 gal All-Steer Wagon; 1650 Gal Poly Water Tank; Bushhog 15’ Batwing Mower; Rhino 15’ Batwing Mower; Irrifrance ABI Small Hose Traveler w/ gun; JD 709 3pt Mower; Caprari MEC D3/65B Irrigation Pump; Fuerst Brothers 26’ Flex Harrow;

ABSOLUTE: (Row 8 - sells approx 11:30am) NH BR780 Round Baler, net wrap; AC 1600 12’ Chisel Plow, pull-type; JD 7200 12R-30” Planter, vac; CIH 5100 Drill, 21x7; JD 446 Round Baler, twine tie; IH 21x7 Drill, press wheels; Glencoe 14’ Field Cult, pull-type; IH 3650 Round Baler, twine tie; JD 950 Cultimulcher, crow foot; Krause 1900 21’ Disk; NI Hay Rake; 2 Wheel Pull-type Tool Carrier; AC 1300 24’ Field Cult; IH 510 21x7 Drill; 12’ Pull-type Chisel Plow, w/ springs; Century 400 Gal Sprayer, pull-type, pto pump; Oliver 415 Sickle Mower, pull-type; GP 20’ Drill, 3pt; IH 45, 21’, 3 bar spike drag; Dunham Lehr 15’ Cultimulcher, weld on front, good rolls; JD 14’ Cultimulcher; Grain-a-vator 10 Feed Cart; IH 45 18’ FC, pull-type, w/ like new sweeps; Snowco Grain Cleaner; IH 3pt 11R/15” Bean Drill, weld on hitch; Glencoe 26’ Field Cult, danish-tine, rear hitch; JD 1000 22’ Field Cult, pull type; CIH 8460 Round Baler, twine tie; (3) Killbros 350 Wagons, nice; 3pt Grader Blade;

MISC: (600) 3 ½ “ x 7’ Red Pine Posts; Agri-Fab 15 gal Lawn Sprayer, new; 15 gal Pull Behind Lawn Tractor Tree Sprayer; Hand Operated Pallet Lift Mover; Set of Forks; MVP 5000 lbs Hyd Service Jack; Industrial Electrical Supplies; Nursery/Greenhouse Supplies, pots, trays, etc; (2) Small Pull Wagons; (2) Rolls of Landscaping Cloth, 1’-8’, 1’-12’; 3’ Green Coated Wire Fence; Complete Smart Box System for JD 1770 CCS 16R; (4) Heavy Duty Hyd Cyls; Pr of 18.4-38 Duals; (27) Neece Shields; (8) Neece Levelers; (2) 7-9hp Grain Bin Fans; Pr 20.8-38 straddle duals, 70%, complete, off JD 9760; Pine Cone Rake; Bar for JD 400 Hoe; Bar for Westgo 8R Cult; Hyd Lift for Eng; Pr 18.4-46 Good Year Tires; Pr 14.9-34 Tires;

Tools: New 10” Benchtop Drill Press; New 14 Pc Cummins Combo Wrench Set, 9mm-32mm; 21 Pc Industrial ¾” Socket Set, ¾”-2” sockets, 20” Ratchet, 18” T-handle Slide, 8” & 3 ½ “ Ext Bars; 6 Pc Combo Wrench Set, 1 3/8” to 2”; 6 Pc Combo Wrench Set, 1 1/16” to 1 5/8”; Complete Set of ½” Drive Socket Set w/ Driver & Extension; Hand Send Packer; Tap Set, course & fine; Welding/Torching Equipment & Tools; Drill Bits; Heavy Duty Air Hammer Gun; 3 Pc Pipe Wrench Set; Soldering Gun; (11) ANH3 Disc Closers;

. . . with much more to be added before the auction!

 

 

NOTE:  PICTURES OF THE EQUIPMENT CAN BE FOUND UNDER EACH CATEGORY ON THIS WEB SITE. IF THERE IS EQUIPMENT THAT YOU DO NOT SEE ON THIS SITE AND WOULD LIKE PICTURES SENT TO YOU, PLEASE CALL OUR OFFICE TODAY. THANK YOU

 

 

Our Location

Print